Environmental Testing
Environmental testing is an essential process that evaluates the performance and durability of various products under different environmental conditions. By subjecting products to rigorous testing, manufacturers can identify weaknesses, design flaws, and areas for improvement. This ensures that products meet required standards and specifications while minimizing their impact on the environment.
Environmental Test Facility
Environmental Test Facility
International standards such as JSS : 55555 : 2012, QM 333 : 2010, IEC 60695-2-10 : 2021, IS 11000-2-1 : 2008, DIN 50021 : 1988 etc emphasize the importance of environmental performance and encourage organizations to minimize their environmental impact through effective management systems. The IEC 60068 series provides guidance on environmental testing for electronic and electrical products, covering aspects like temperature, humidity, vibration, and shock resistance.
Different industries have their specific standards to ensure product reliability and environmental compatibility.
Environmental testing methods include thermal testing, which assesses a product's resistance to extreme temperature variations, vibration testing to simulate transportation or operational conditions, humidity testing to evaluate resistance to high humidity or condensation, and salt spray testing to assess corrosion resistance.
By conducting environmental testing according to various standards, manufacturers can improve product quality, reduce failures, and enhance customer satisfaction. Moreover, adhering to these standards promotes sustainable practices and demonstrates a commitment to environmental sustainability| S. No | Products / Tests | IS/IEC Standards |
|---|---|---|
| 1. | Bump Test | JSS : 55555 : 2012 |
| 2. | Damp Test | JSS : 55555 : 2012 |
| 3. | Dust Test | JSS : 55555 : 2012 |
| 4. | Thermal shock Test | JSS : 55555 : 2012 |
| 5. | High Temperature | JSS : 55555 : 2012 |
| 6. | Drip Proof | JSS : 55555 : 2012 |
| 7. | Drop Test | JSS : 55555 : 2012 |
| 8. | Low Test | JSS : 55555 : 2012 |
| 9. | Tropical Exposure | JSS : 55555 : 2012 |
| 10. | Vibration | JSS : 55555 : 2012 |
| 11. | Damp Heat Steady State | QM 333 : 2010 |
| 12. | Dry Heat | QM 333 : 2010 |
| 13. | Damp Heat Cyclic | QM 333 : 2010 |
| 14. | Cold ( Low Temperature ) | QM 333 : 2010 |
| 15. | Rapid Cyclic Temperature Changes / Thermal Shock | QM 333 : 2010 |
| 16. | Temperature Cyclic | QM 333 : 2010 |
| 17. | Tropical Exposure | QM 333 : 2010 |
| 18. | Glow Wire Test | IEC 60695-2-10 : 2021 |
| 19. | Needle Flame Test | IEC 60695-11-5 : 2016 |
| 20. | Ball Pressure / Resistance to Heat | IEC 60695-10-2 : 2014 |
| 21. | Glow Wire Test | IS 11000-2-1 : 2008 |
| 22. | Needle Flame Test | IS 11000-2-2 : 2008 |
| 23. | IP Testing | IS / IEC 60529 : 1989 |
| 24. | IP Testing | IS / IEC 60529 : 2001 , IEC 60529 + A1 + A2 : 2013 |
| 25. | IK Test | IEC / EN 62262 :2002 |
| 26. | Thermal Shock Test | IEC 60068 - 2 - 14 : 2009 |
| 27. | Thermal Shock Test | IS 9000 : 1988 |
| 28. | Salt Spray Test | DIN 50021 : 1988 |
| 29. | Vibration Sine Random and Shock | IEC 61373 : 2010 |
